VW Sharan repair

. Diesel engines: 1,9 l of TDI.
+ 1. Introduction
+ 2. VR6 engine
+ 3. Two-liter engine (ADY)
+ 4. System of greasing of the engine
+ 5. Cooling system
+ 6. System of injection of fuel of the VR6 engine
+ 7. Simos system of injection of fuel of the 2,0-liter engine
+ 8. Ignition system
+ 9. Coupling
+ 10. Mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
- 12. Hydraulic booster of a steering
   + 12.1. Steering drive
   + 12.2. Replacement of cross-section steering drafts
   - 12.3. Hydraulic system
      12.3.1. Filling of hydraulic system and air removal from it
      12.3.2. Check of hydraulic system on tightness
      12.3.3. Adjustment of a tension of a maple belt of the pump of the hydraulic booster of a steering
      12.3.4. Removal and installation of the pump of the hydraulic booster of a steering
   12.4. Hoses, pipelines
+ 13. Forward suspension bracket
+ 14. Back suspension bracket
+ 15. Brake system
+ 16. Electric equipment
+ 17. Diesel engine
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
+ 20. Power supply system of the diesel engine and turbokompressor
+ maintenance Card
+ Specifications and characteristics
+ Elektroskhema








Repair Sharan/Sharan Volkswagen>> Hydraulic booster of a steering>> Hydraulic system>> Check of hydraulic system on tightness
For check of tightness of hydraulic system execute the following:
- twist a steering wheel in both parties against the stop and not for long take forward wheels in extreme situation. Thereby in hydraulic system the greatest pressure which will allow to find a place of an effluence of liquid will be created;
- check area of a gear of a steering (a rotary zaslonka), rubber cuffs on a gear lath, the ends of a gear lath (sealing rings of a gear lath), the pump of the hydraulic booster and a place of accession of hoses. The liquid which has flowed out in these parts indicates a leakage.