11.1. Removal and installation of a power shaft

  11.1.1. On the car with a mechanical transmission

  11.1.2. On the car with an automatic transmission

11.2. Repair of a power shaft

Shaft of a drive of the right and left wheels have distinctions. Thus:

- the external hinge of equal angular speeds (CV JOINT) is identical to both power shafts. At damage replace it completely;

- always replace a bolt of fastening of a shaft in a wheel nave;

- the left and right internal hinges of equal angular speeds are not identical, and on the car with an automatic transmission the internal hinge has other design (so-called trekhshipovy the hinge) and is not suitable for installation on the car with a mechanical transmission;

- grease hinges with special greasing (see further);

Fig. 258. Shaft of a drive of a wheel: 1 — a collar; 2 — a cover of the external CV JOINT; 3 — a collar; 4 — the external CV JOINT; 5 — a bolt; 6 — a collar; 7 — the Protective cover of the internal CV JOINT; 8 — the shock-absorber; 9 — a drive shaft; 10 — a tarelchaty spring, at installation pay attention to correctness of its situation; 11 — a persistent ring; 12 — a lock ring (replace always); 13 — the left internal CV JOINT; 14 — the right internal CV JOINT, on the car with an automatic transmission; 15 — a power shaft with the internal trekhshipovy hinge on the car with an automatic transmission; 16 — a bolt, 80 N · m; 17 — a collar; 18 — a protective cover internal the CV JOINT (Trekhshipovy the hinge)

- distinctions between power shafts and hinges are shown on fig. 258 .