VW Sharan repair

. Diesel engines: 1,9 l of TDI.
+ 1. Introduction
+ 2. VR6 engine
+ 3. Two-liter engine (ADY)
+ 4. System of greasing of the engine
+ 5. Cooling system
+ 6. System of injection of fuel of the VR6 engine
+ 7. Simos system of injection of fuel of the 2,0-liter engine
+ 8. Ignition system
+ 9. Coupling
+ 10. Mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
+ 12. Hydraulic booster of a steering
+ 13. Forward suspension bracket
+ 14. Back suspension bracket
- 15. Brake system
   + 15.1. Adjustment of brake system
   + 15.2. Disk brakes of forward wheels
   + 15.3. Brakes of back wheels
   15.4. Processing of brake disks
   + 15.5. Main brake cylinder
   15.6. Check of the vacuum amplifier of a brake drive
   15.7. Pumping of brakes
   + 15.8. Parking brake
   + 15.9. ABS system (anti-blocking brake system)
+ 16. Electric equipment
+ 17. Diesel engine
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
+ 20. Power supply system of the diesel engine and turbokompressor
+ maintenance Card
+ Specifications and characteristics
+ Elektroskhema








Repair Sharan/Sharan Volkswagen>> Brake system>> Processing of brake disks
If at check of a condition of a brake disk it will become clear that on its working surface there are teases and deep risks, and also other damages, прошлифуйте or pierce a brake disk again to make them serviceable. Both parties of a brake disk should be processed on the identical depth, both parties of a disk should be parallel each other, and the thickness of a disk should not be less than 23,0 mm for a forward disk and 8,0 mm — for back.
Check axial palpation of a working surface of a brake disk, without removing it from the car, by means of the measuring device on an external edge. For what establish a pin of the measuring device at distance about 5 mm from external edge of a brake disk and slowly twist a disk. If palpation more admissible, replace a disk or прошлифуйте it.