Fig. 300. Back suspension bracket: 1 — the rubber buffer, 40 N · m; 2 — a washer of fastening of a spring, at installation pay attention to its correct situation; 3 — a spring; 4 — a bearing plate of a cross-section beam; 5 — a bolt, 110 N · m; 6 — a bolt, 170 N · m; 7 — the block of the bearing of a wheel; 8 — a wheel bolt, 140 N · m; 9 — the longitudinal lever with the case of the bearing of a wheel; 10 — a nut, 140 N · m (replace always); 11 — the plug of the longitudinal lever; 12 — a bolt (replace always); 13 — a bolt (replace always); 14 — the shock-absorber; 15 — a bolt (replace always)

Internal nut of the longitudinal lever       of 170 N · m

Bolt of an arm of an auxiliary frame       of 260 N · m

Bearing of a suspension bracket of an arm       of 65 N · m

Rubber bufer       of 40 N · m

Fastening of the shock-absorber       of 130 N · m

Assembly collars of the stabilizer of cross-section stability       of 30 N · m

Bridge beam to the bottom of the car       of 110 N · m

Average bolt of a beam of the bridge       of 170 N · m

Bolts of a wheel       of 140 N · m

Nut of a nave of wheel/fastening of the bearing of a wheel       of 200 N · m

Brackets of the disk brake mechanism of a wheel       of 110 N · m

Bracket of the disk brake mechanism to a nadramnik       of 35 N · m

Sensor of frequency of rotation of ABS system       of 10 N · m

Reflector to the case of the bearing of a wheel       of 10 N · m

Cap nuts, pipelines of a brake drive       of 13 N · m