VW Sharan repair

. Diesel engines: 1,9 l of TDI.
+ 1. Introduction
+ 2. VR6 engine
+ 3. Two-liter engine (ADY)
+ 4. System of greasing of the engine
+ 5. Cooling system
+ 6. System of injection of fuel of the VR6 engine
+ 7. Simos system of injection of fuel of the 2,0-liter engine
+ 8. Ignition system
+ 9. Coupling
+ 10. Mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
+ 12. Hydraulic booster of a steering
+ 13. Forward suspension bracket
- 14. Back suspension bracket
   14.1. Removal and installation
   14.2. The longitudinal lever of a suspension bracket / spring of a suspension bracket — removal and installation
   14.3. Removal and installation of shock-absorbers
   14.4. Bearings of back wheels
+ 15. Brake system
+ 16. Electric equipment
+ 17. Diesel engine
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
+ 20. Power supply system of the diesel engine and turbokompressor
+ maintenance Card
+ Specifications and characteristics
+ Elektroskhema








Repair Sharan/Sharan Volkswagen>> Back suspension bracket>> Removal and installation of shock-absorbers

Fig. 307. Bottom fastening of the shock-absorber. The top fastening looks similarly. Moment of an inhaling of 130 N · m





Removal and installation of shock-absorbers can be carried out with use of the provided instructions i.e. as soon as the longitudinal lever is raised by a jack on sufficient height, it is possible to remove top and bottom (fig. 307) of fastening of the shock-absorber. Bolts of a suspension bracket of the shock-absorber replace, if they were removed.