VW Sharan repair

. Diesel engines: 1,9 l of TDI.
+ 1. Introduction
+ 2. VR6 engine
+ 3. Two-liter engine (ADY)
+ 4. System of greasing of the engine
+ 5. Cooling system
+ 6. System of injection of fuel of the VR6 engine
+ 7. Simos system of injection of fuel of the 2,0-liter engine
+ 8. Ignition system
- 9. Coupling
   9.1. Coupling removal
   9.2. Check of a technical condition and coupling control
   9.3. Coupling installation
   - 9.4. Drive of switching off of coupling
      9.4.1. Removal and installation of the working cylinder of coupling
      9.4.2. Removal and installation of the main cylinder of coupling
      9.4.3. Air removal from a coupling hydraulic actuator
   9.5. Malfunctions of coupling
+ 10. Mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
+ 12. Hydraulic booster of a steering
+ 13. Forward suspension bracket
+ 14. Back suspension bracket
+ 15. Brake system
+ 16. Electric equipment
+ 17. Diesel engine
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
+ 20. Power supply system of the diesel engine and turbokompressor
+ maintenance Card
+ Specifications and characteristics
+ Elektroskhema








Repair Sharan/Sharan Volkswagen>> Coupling>> Drive of switching off of coupling>> Air removal from a coupling hydraulic actuator

Fig. 238. Pumping of a hydraulic actuator of coupling (the arrow showed a place of putting on of a rubber hose on the valve): 1 — a hose; 2 — a rozhkovy key for an otvorachivaniye of the valve of pumping





Air removal from a hydraulic actuator of coupling is carried out similar to air removal from brake system. The valve of pumping is nearby from an engine junction with a transmission ( fig. 238 , the shooter).
It is necessary to delete air from a hydraulic actuator of coupling always when hydraulic pipelines were disconnected or when air otherwise appeared in hydraulic system. A sign of availability of air in hydraulic system is the slowed-down return of the pressed pedal of coupling or its not return at all.