VW Sharan repair
. Diesel engines: 1,9 l of TDI.
+
1. Introduction
-
2. VR6 engine
+
2.1. Cнятие and installation
+
2.2. Dismantling and assembly
+
2.3. Head of the block of cylinders and valves
-
2.4. Pistons and rods
2.4.1. Removal
2.4.2. Measurement of internal diameter of the cylinder
2.4.3. Check of pistons and rods
2.4.4. Measurement of a gap of the bearing of a rod
2.4.5. Assembly of pistons and rods
2.4.6. Installation of pistons and rods
2.5. Block of cylinders
+
2.6. Cranked shaft and radical bearings
+
2.7. Drive of the mechanism of a gazoraspredeleniye
2.8. Intermediate shaft
2.9. Compression check in engine cylinders
+
2.10. System of production of the fulfilled gases
+
3. Two-liter engine (ADY)
+
4. System of greasing of the engine
+
5. Cooling system
+
6. System of injection of fuel of the VR6 engine
+
7. Simos system of injection of fuel of the 2,0-liter engine
+
8. Ignition system
+
9. Coupling
+
10. Mechanical 5-step transmission
+
11. Shaft of a drive of wheels
+
12. Hydraulic booster of a steering
+
13. Forward suspension bracket
+
14. Back suspension bracket
+
15. Brake system
+
16. Electric equipment
+
17. Diesel engine
+
18. System of greasing of the diesel engine
+
19. System of cooling of the diesel engine
+
20. Power supply system of the diesel engine and turbokompressor
+
maintenance Card
+
Specifications and characteristics
+
Elektroskhema
Repair Sharan/Sharan Volkswagen
>>
VR6 engine
>>
Pistons and rods
>>
Measurement of a gap of the bearing of a rod
This operation is in detail described in item 2.6.2. Measurement is carried out in the same way, as well as gap definition in radical bearings.