Fig. 135. A forward part of the block of cylinders with the details established on it: 1 — the block of cylinders; 2 — a segment shponka; 3 — an O-shaped sealing ring; 4 — an engine junction with "weight"; 5 — a bolt, 25 N · m; 6 — the detonation sensor; 7 — a bolt, 20 N · m; 8 — the ignition distributor; 9 — a bolt, 25 N · m; 10 — the plug; 11 — laying; 12 — the basis of the oil filter; 13 — the machine gun of system of ventilation of a case; 14 — an oil radiator; 15 — the oil filter; 16 — a bolt, 10 N · m; 17 — the sensor of frequency of rotation of a cranked shaft; 18 — basic rings; 19 — a bolt, 20 N · m (to tighten for 90 °), always on replacement; 20 — elastic tightening an element; 21 — a nut, 30 N · m; 22 — an arm; 23 — a sealing ring; 24 — tightening the lever; 25 — a bolt with T-shaped;;;;;;;;; 26 — the pump of system of cooling; 27 — the pallet; 28 — a bolt, 20 N · m, an internal shestigrannik; 29 — the holder of the pump of the hydraulic booster of a steering; 30 — laying (always on replacement)

All instructions and the recommendations provided for the block of cylinders of the VR6 engine (see подразд. 2.5), are suitable and for the 2,0-liter engine. The design of a forward part of the block of cylinders of the 2,0-liter engine is presented on fig. 135 .