VW Sharan repair

. Diesel engines: 1,9 l of TDI.
+ 1. Introduction
+ 2. VR6 engine
+ 3. Two-liter engine (ADY)
+ 4. System of greasing of the engine
+ 5. Cooling system
+ 6. System of injection of fuel of the VR6 engine
+ 7. Simos system of injection of fuel of the 2,0-liter engine
+ 8. Ignition system
+ 9. Coupling
+ 10. Mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
+ 12. Hydraulic booster of a steering
+ 13. Forward suspension bracket
+ 14. Back suspension bracket
+ 15. Brake system
- 16. Electric equipment
   + 16.1. Storage battery
   + 16.2. Generator
   + 16.3. Starter
   - 16.4. Screen wipers
      16.4.1. Replacement of the lever of a screen wiper
      16.4.2. Replacement of a rubber tape of a brush and replacement of the brush of a screen wiper
      16.4.3. Replacement of a motor-reducer of a screen wiper
   + 16.5. Headlights
   16.6. Back lamps
   16.7. Replacement of lamps of forward indexes of turn
+ 17. Diesel engine
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
+ 20. Power supply system of the diesel engine and turbokompressor
+ maintenance Card
+ Specifications and characteristics
+ Elektroskhema

Repair Sharan/Sharan Volkswagen>> Electric equipment>> Screen wipers>> Replacement of the lever of a screen wiper
Replacement of the lever of a screen wiper carry out in the following order:
- switch off a screen wiper;
- shift a safety cover and weaken, the become visible, six-sided nut (do not turn on it completely);
- shake the brush lever forward-back so that it was liberated;
- now completely unscrew a nut and carefully pull together the brush lever;
- put on the new lever of a brush in the correct situation and put it on glass;

Fig. 346. Definition "correct" provision of brushes of a screen wiper relatively each other and bottom edge of a windscreen

- check correctness of installation of a new brush for what measure distance And and In (fig. 346) . If the interval of A makes 20 mm, and B interval = 45 mm, the lever of a brush costs in the correct situation;
- tighten a six-sided nut the moment of 20 N · m;
- include a screen wiper and be convinced that screen wiper brushes at its work constantly come back to the correct situation;
- establish a safety cover on a former place.