Service, the device and repair Sharan's Volkswagen - 16.5.3. Dismantling and headlight assembly

VW Sharan repair

. Diesel engines: 1,9 l of TDI.
+ 1. Introduction
+ 2. VR6 engine
+ 3. Two-liter engine (ADY)
+ 4. System of greasing of the engine
+ 5. Cooling system
+ 6. System of injection of fuel of the VR6 engine
+ 7. Simos system of injection of fuel of the 2,0-liter engine
+ 8. Ignition system
+ 9. Coupling
+ 10. Mechanical 5-step transmission
+ 11. Shaft of a drive of wheels
+ 12. Hydraulic booster of a steering
+ 13. Forward suspension bracket
+ 14. Back suspension bracket
+ 15. Brake system
- 16. Electric equipment
   + 16.1. Storage battery
   + 16.2. Generator
   + 16.3. Starter
   + 16.4. Screen wipers
   - 16.5. Headlights
      16.5.1. Replacement of lamps of headlights
      16.5.2. Removal and headlight installation
      16.5.3. Dismantling and headlight assembly
      16.5.4. Headlight adjustment
   16.6. Back lamps
   16.7. Replacement of lamps of forward indexes of turn
+ 17. Diesel engine
+ 18. System of greasing of the diesel engine
+ 19. System of cooling of the diesel engine
+ 20. Power supply system of the diesel engine and turbokompressor
+ maintenance Card
+ Specifications and characteristics
+ Elektroskhema

Repair Sharan/Sharan Volkswagen>> Electric equipment>> Headlights>> Dismantling and headlight assembly

Fig. 350. Separate elements of a headlight: 1 — the screw, 8 N · m; 2 — a lock clip; 3 — the headlight case; 4 — the ventilating device; 5 — a cover; 6 — the boss of a lamp of dimensional light; 7 — a dvukhnitevy lamp, H4; 8 — the filament lamp of dimensional light; 9 — a reflector; 10 — rubber sealing laying; 11 — a rasseivatel of a headlight; 12 — the fastening screw; 13 — the electric motor turning a reflector of a headlight

There is no need completely to replace a headlight if its rasseivatel breaks or the reflector will be damaged. The headlight can be disassembled on components (see fig. 350 ). Dismantling of a headlight carry out in the following order:

- remove the forward index of turn;

- remove a front grille;

- by means of a screw-driver carefully remove five clips of fastening of a rasseivatel which are located on his perimeter;

- remove a rasseivatel of a headlight and rubber sealing laying.

Installation of a headlight carry out as it should be, the return to dismantling, carrying out the following recommendations:

- do not concern a reflector barehanded;

- always replace rubber sealing laying of a rasseivatel of a headlight;

- clips of fastening of a rasseivatel establish manually on former places;

- after headlight installation surely carry out its adjustment.